Chevrolet C30 Distributor

The Chevrolet C30 belongs to the third generation of the C/K series. The Chevrolet C30 made a big mark in the history of pickup trucks. Classic parts like distributor parts contribute to the success of this car. The Chevrolet C30 distributor involves a rotating arm in the inner part of the distributor cap and above the distributor shaft. Usually, the metal part of the rotor comes into contact with high-voltage cables through a carbon brush. With the high voltage generated from the ignition coil, an electric current can jump the small gaps between the rotors. A faulty distributor can lead to stalling, an engine backfire, and poor engine performance.

Chevrolet C30 has lots of auto parts with impressive performance. But the distributor still needs repair and maintenance after a long time of usage. A distributor is used to distribute the high voltage which has been generated to the ignition coil, and then send the spark to the spark plugs in the engine's proper firing order. The removal process for a Chevrolet C30 distributor is as follows. Remove the retaining clips holding the distributor cap in place. Then remove the cap and mark the position of the rotor. Next, remove all ignition wires. And if necessary, label the vacuum lines and the bolt locking the distributor in place. Finally, pull the distributor straight out and remove the O-ring. Welcomes to a lot of related Chevrolet C30 parts available online. We provide nice services and great Chevrolet C30 products to consumers. And we are online for you 24/7.